20M HF Dipole antenna.
Monoband 20m dipole cut for 20m band, Trimming of the wire elements for resonance may be required at your installed location.
When tuned for 20m only no ATU is required.
If however you wish to use this antenna on other higher hf bands an ATU will be required,
To tune the bands above 20m.
If you intend to use this antenna with an ATU for multiband use no trimming of the antenna wire is required.
Be sure to seal & waterproof the coax connection at the dipole centre to prevent rain water getting into your coax feeder cable & to give protection from the weather elements over time.
Great for use at home or portable field days.
Can be used Horizontal, Inverted V, Or Sloped configurations
Light weight & easy to setup, Great for small gardens where space is limited.
Product details
20m HF Dipole antenna.
feed point 50 ohms for coax cable.
Each wire element approximate length 5.0m,
Power rating 400w.
Antenna wire non kink Polyweave flex.
Weight 350g
Made in the uk by M1ECC Antennas.